#
Mathematical models
Resource Information
The concept ** Mathematical models** represents the subject, aboutness, idea or notion of resources found in **Ramapo Catskill Library System**.

The Resource
Mathematical models
Resource Information

The concept

**Mathematical models**represents the subject, aboutness, idea or notion of resources found in**Ramapo Catskill Library System**.- Label
- Mathematical models

- Source
- nasat

## Context

Context of Mathematical models#### Subject of

- 4D dynamic required navigation performance final report
- A "Kane's Dynamics" model for the active rack isolation system
- A comparison of analytical and experimental data for a magnetic actuator
- A computational investigation of gear windage
- A computational methodology for simulating thermal loss testing of the Advanced Stirling C
- A constitutive model for the inelastic multilaxial cyclic response of a nickel base superalloy René 80
- A direct-inverse method for transonic and separated flows about airfoils
- A life-cycle cost estimating methodology for NASA-developed air traffic control decision support tools
- A mathematical model of oxygen transport in skeletal muscle during hindlimb unloading
- A mathematical simulation model of a CH-47B helicopter
- A model of security monitoring
- A multi-domain spectral method for supersonic reactive flows
- A new approach to measure contact angle and evaporation rate with flow visualization in a sessile drop
- A numerical model of unsteady, subsonic aeroelastic behavior
- A parametric study of accelerations of an airplane due to a wake vortex system
- A parametric study of fine-scale turbulence mixing noise
- A practical approach for minimum time control of the spacecraft control laboratory experiment (SCOLE)
- A reduced model for prediction of thermal and rotational effects on turbine tip clearance
- A review of the Ginzburg-Syrovatskii's galactic cosmic-ray propagation model and its leaky-box limit
- A simple, mass balance model of carbon flow in a controlled ecological life support system
- A simple, mass balance model of carbon flow in a controlled ecological life support system
- A study of material damping in large space structures : final technical report
- A study of the effect of synoptic scale processes in GCM modelling : final technical report
- A system approach to aircraft optimization
- A theoretical and experimental study of turbulent particle-laden jets
- A transient response method for linear coupled substructures
- ACCEPT : introduction of the adverse condition and critical event prediction toolbox
- AEOSS design guide for system analysis on Advanced Earth-Orbital Spacecraft Systems
- AEOSS runtime manual for system analysis on Advanced Earth-Orbital Spacecraft Systems
- Active control of flow separation over an airfoil
- Advanced composite stabilizer for Boeing 737 aircraft
- Aerodynamic design via control theory
- Aerodynamic parameters of an advanced fighter aircraft estimated from flight data : preliminary results
- Aerothermal analysis of a wing-elevon cove with variable leakage
- Aircraft flight test trajectory control
- An improved analytic model for microdosimeter response
- An integrated methodology for optimizing structural composite damping
- An integrated methodology for optimizing structural composite damping
- An introduction to transient engine applications using the numerical propulsion system simulation (NPSS) and MATLAB®
- An irreversible constitutive law for modeling the delamination process using interface elements
- An optimal deconvolution method for reconstructing pneumatically distorted near-field sonic boom pressure measurements
- An optimization model for the U.S. air-traffic system
- Analysis and sizing for transient thermal heating of insulated aerospace vehicle structures
- Analysis of direct solar illumination on the backside of space station solar cells
- Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report
- Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report submitted to NASA-Lewis Research Center, Cleveland, Ohio
- Analytic guided-search model of human performance accuracy in target-localization search tasks
- Analytic theory for the determination of velocity and stability of bubbles in a Hele-Shaw cell, Part II, Stability
- Analytic theory for the selection of Saffman-Taylor fingers in the presence of thin film effects
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 3, for the period 22 September 1985 through 21 December 1985
- Analytical round robin for elastic-plastic analysis of surface cracked plates : phase I results
- Analytical round robin for elastic-plastic analysis of surface cracked plates : phase II results
- Application of satellite data in variational analysis for global cyclonic systems : status report
- Application of the semi-empirical force-limiting approach for the CoNNeCT SCAN Testbed
- Applications of Ko displacement theory to the deformed shape predictions of the doubly-tapered Ikhana wing
- Ares I-X flight test vehicle : stack 1 modal test
- Ares I-X flight test vehicle : stack 5 modal test
- Ares I-X flight test vehicle modal test
- Assessing upper-level winds on day-of-launch
- Axions and SN 1987A : axion trapping
- BOREAS derived surface meteorological data
- Baseline estimation from simultaneous satellite laser tracking
- Bearing-load modeling and analysis study for mechanically connected structures
- CFD modeling of free-piston Stirling engines
- CFL3D contribution to the AIAA Supersonic Shock Boundary Layer Interaction Workshop
- Calculation of the Coulomb fission cross sections for Pb-Pb and Bi-Pb interactions at 158 A GeV
- Chemoviscosity modeling for thermosetting resins : final report for the period ended August 31, 1985
- Combustion of lox with H2(g) under subcritical, critical and supercritical conditions (task 1) and experimental observation of dense spray and mixing of impinging jets (task 2) : semi-annual report
- Cometary atmospheres : modeling the spatial distribution of observed neutral radicals : report for the period, June 1, 1985 to September 30, 1986
- Comparison of predictive modeling methods of aircraft landing speed
- Compressibility considerations for [kappa-omega] turbulence models in hypersonic boundary layer applications
- Computational analysis of the SSME fuel preburner flow : final report
- Computational simulation of damage propagation in three-dimensional woven composites
- Computational study of near-limit propagation of detonation in hydrogen-air mixtures
- Computational study of near-limit propagation of detonation in hydrogen-air mixtures
- Computational study of separating flow in a planar subsonic diffuser
- Computational work to support FAP/SRW variable-speed power-turbine development
- Computer modeling of human decision making : report
- Computer simulation of the mathematical modeling involved in constitutive equation development : via symbolic computations
- Computerized inspection of gear tooth surfaces
- Constitutive modeling for isotropic materials (HOST) : third annual status report
- Constitutive soil properties for mason sand and Kennedy Space Center
- Critique of macro flow/damage surface representations for metal matrix composites using micromechanics
- Cryogenic fluid storage technology development : recent and planned efforts at NASA
- Current status of post-combustor trace chemistry modeling and simulation at NASA Glenn Research Center
- Deformation analysis of rotary combustion engine housings : final report on NASA grant NAG 3-456
- Deformation and life analysis of composite flywheel disk and multi-disk systems
- Deformation and life analysis of composite flywheel disk and multi-disk systems
- Dependence of dynamic modeling accuracy on sensor measurements, mass properties, and aircraft geometry
- Developing uncertainty models for robust flutter analysis using ground vibration test data
- Developing uncertainty models for robust flutter analysis using ground vibration test data
- Development and application of benchmark examples for mode II static delamination propagation and fatigue growth predictions
- Development and demonstration of a computational tool for the analysis of particle vitiation effects in hypersonic propulsion test facilities
- Development of a benchmark example for delamination fatigue growth prediction
- Development of a linear Stirling system model with varying heat inputs
- Displacement models for THUNDER actuators having general loads and boundary conditions
- Dual-Pulse Pulse Position Modulation (DPPM) for deep-space optical communications : performance and practicality analysis
- Dual-pump CARS development and application to supersonic combustion
- Duct flow nonuniformities : effects of struts in SSME HGM II+�: interim report
- Effect of liquid droplets on turbulence in a round gaseous jet
- Effect of temperature gradient on thick film selective emitter emittance
- Effects of switch leakages upon Nimbus-7 SMMR calibration
- Efficient computation of separation-compliant speed advisories for air traffic arriving in terminal airspace
- Empirical model development for predicting shock response on composite materials subjected to pyroshock loading
- Energy efficient engine low pressure subsystem aerodynamic analysis
- Energy efficient engine low pressure subsystem flow analysis
- Environmental loss characterization of an advanced stirling convertor (ASC-E2) insulation package using a mock heater head
- Equivalent circuit models for AC impedance data analysis
- Equivalent linearization analysis of geometrically nonlinear random vibrations using commercial finite element codes
- Estimation of aircraft nonlinear unsteady parameters from wind tunnel data
- Euler and Navier-Stokes computations for two-dimensional geometries using unstructured meshes
- Examination of relationship between photonic signatures and fracture strength of fused silica used in orbiter windows
- Examination of solar cycle statistical model and new prediction of solar cycle 23
- Experimental and modeling studies of the combustion characteristics of conventional and alternative jet fuels final report
- Exploratory studies in generalized predictive control for active gust load alleviation
- Exponential order statistic models of software reliability growth
- Fault injection and monitoring capability for a fault-tolerant distributed computation system
- Final report for SRB combustion dynamics analysis computer program (CDA-1)
- Finite and boundary element modeling of the NASA Langley aluminum testbed cylinder (ATC)
- Finite element model for failure study of two-dimensional triaxially braided composite
- Flight data reduction of wake velocity measurements using an instrumented OV-10 airplane
- Flowfield computation of entry vehicles
- Flows in pinned arrays simulating brush seals
- Flows in pinned arrays simulating brush seals
- Free vibrations of thin-walled semicircular graphite epoxy composite frames
- Frequency shift during mass properties testing using compound pendulum method
- Fundamental Remote Sensing Science Research Program, Part 1, Status report of the Scene Radiation and Atmospheric Effects Characterization Project
- Gas-jet and tangent-slot film cooling tests of a 12.50�cone at Mach number of 6.7
- Generalized fluid system simulation program, version 5.0--educational
- Generalized predictive control of dynamic systems with rigid-body modes
- Geomagnetic main field modeling using magnetohydrodynamic constraints
- Geometry and simulation results for a gas turbine representative of the energy efficient engine (EEE)
- HYTESS, a Hypothetical Turbofan Engine Simplified Simulation
- Heat entrapment effects within liquid acquisition devices
- Heat entrapment effects within liquid acquisition devices
- Heat transfer and flow on the first stage blade tip of a power generation gas turbine, Part 2, Simulation results
- Heating-rate-coupled model for hydrogen reduction of JSC-1A
- Hierarchical safety cases
- Identifying and characterizing discrepancies between test and analysis results of compression-loaded panels
- Impact testing and simulation of composite airframe structures
- Impact testing on reinforced carbon-carbon flat panels with ice projectiles for the space shuttle return to flight program
- Implementation of a sage-based stirling model into a system-level numerical model of the fission power system technology demonstration unit
- Implementation of a smeared crack band model in a micromechanics framework
- Implementation of an integrated on-board aircraft engine diagnostic architecture
- Improved modeling of finite-rate turbulent combustion processes in research combustors
- Improved subcell model for the prediction of braided composite response
- Improvement and extension of a radar forest backscattering model : semiannual report
- Improvement of the second - and third-moment modeling of turbulence
- Independent peer review of Communications, Navigation, and Networking re-Configurable Testbed (CoNNeCT) project Antenna Pointing Subsystem (APS) Integrated Gimbal Assembly (IGA) structural analysis
- Inspection of the Math Model Tools for on-orbit assessment of impact damage report
- Integrated formal analysis of timed-triggered ethernet
- Integrated research in constitutive modelling at elevated temperatures
- Integrated risk/cost planning models for the U.S. air traffic system
- Integration assessment of visiting vehicle induced electrical charging of the International Space Station structure
- Intelligent systems approach for automated identification of individual control behavior of a human operator
- International Space Station ECLSS technical task agreement summary report
- Inverse problems in the modeling of vibrations of flexible beams : final report
- Investigation of a liquid-fed water resistojet plume
- Investigation of a macromechanical approach to analyzing triaxially-braided polymer composites
- Issues of long-term cryogenic propellant storage in microgravity
- Jet noise physics and modeling using first-principles simulations
- LOX/hydrogen coaxial injector atomization test program
- Life limiting behavior in interlaminar shear of continuous fiber-reinforced ceramic matrix composites at elevated temperatures
- Liquid acquisition device design sensitivity study
- Loads model development and analysis for the F/A-18 Active Aeroelastic Wing airplane
- Local and global bifurcations of flow fields during physical vapor transport : application to a microgravity experiment
- Low-frequency sound propagation modeling over a locally-reacting boundary using the parabolic approximation
- MOEMS modeling using the geometrical matrix toolbox
- Mach number effects on turbine blade transition length prediction
- Material property characterization of AS4/VRM-34 textile laminates
- Mathematical modeling of electrodynamics near the surface of the Earth and planetary water worlds
- Measurement of the correlation and coherence lengths in boundary layer flight data
- Microscale fracture testing of HfO2-Si environmental barrier coatings
- Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams
- Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams
- Microstructure modeling of third generation disk alloys : final report
- Missile aerodynamics for ascent and re-entry
- Model development in viscoplastic ratchetting
- Model verification and validation concepts for a probabilistic fracture assessment model to predict cracking of knife edge seals in the space shuttle main engine high pressure oxidizer
- Model-based diagnosis in a power distribution test-bed
- Modeled and measured dynamics of a composite beam with periodically varying form core
- Modeling and development of a magnetic bearing controller for a high speed flywheel system
- Modeling cyclic phase change and energy storage in solar heat receivers
- Modeling of aerobrake ballute stagnation point temperature and heat transfer to inflation gas
- Modeling of crack bridging in a unidirectional metal matrix composite
- Modeling of high-strain-rate deformation, fracture, and impact behavior of advanced gas turbine engine materials at low and elevated temperatures
- Modeling of turbulent boundary layer surface pressure fluctuation auto and cross spectra : verification and adjustments based on TU-144LL Data
- Modeling progressive failure of bonded joints using a single joint finite element
- Modeling reaction control system effects on Mars Odyssey
- Modeling the dissipation rate in rotating turbulent flows
- Modification of a macromechanical finite-element based model for impact analysis of triaxially-braided composites
- Multi-dimensional measurements of combustion species in flame tube and sector gas turbine combustors
- Multiphysics modeling of an annular linear induction pump with applications to space nuclear power systems
- NASA AVOSS fast-time wake prediction models : user's guide
- Noise produced by turbulent flow into a rotor : theory manual for atmospheric turbulence prediction and mean flow and turbulence contraction prediction
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Nonequilibrium radiation and chemistry models for aerocapture vehicle flowfields : semiannual progress report, February 1991 - June 1991
- Nonlinear motion cueing algorithm : filtering at pilot station and development of the nonlinear optimal filters for pitch and roll
- Notched strength allowables and inplane shear strength of AS4/VRM-34 textile laminates
- Numerical optimization in Hilbert space using inexact function and gradient evaluations
- Numerical simulation of vitiation effects on a hydrogen-fueled dual-mode scramjet
- Observation model and parameter partials for the JPL geodetic GPS modeling software "GPSOMC"
- On central-difference and upwind schemes
- On multifunctional collaborative methods in engineering science
- Optical communication link atmospheric attenuation model
- Optimal routing and control of multiple agents moving in a transportation network and subject to an arrival schedule and separation constraints
- Optimal substrate preheating model for thermal spray deposition of thermosets onto polymer matrix composites
- Orion active thermal control system dynamic modeling using simulink/MATLAB
- Outer satellite atmospheres : their extended nature and planetary interactions
- Overview and evaluation of a computational bone physiology modeling toolchain and its application to testing of exercise countermeasures
- Overview of heat addition and efficiency predictions for an advanced stirling convertor
- Oxygen diffusion and reaction kinetics in continuous fiber ceramic matrix composites
- Oxygen permeability and grain-boundary diffusion applied to alumina scales
- Parametric modeling of the safety effects of NextGen terminal maneuvering area conflict scenarios
- Piezoelectric vibration damping study for rotating composite fan blades
- Plates and shells containing a surface crack under general loading conditions
- Porous media and mixture models for hygrothermal behavior of phenolic composites
- Possible deficiencies in predicting transonic aerodynamics on the X-43A
- Power management and distribution (PMAD) model development : final report
- Practical techniques for modeling gas turbine engine performance
- Preliminary assessment of soil moisture over vegetation
- Preliminary structural sensitivity study of hypersonic inflatable aerodynamic decelerator using probabilistic methods
- Processing of DMSP magnetic data and its use in geomagnetic field modeling
- Quadratic optimization in the problems of active control of sound
- Quantitative global heat transfer in a Mach-6 quiet tunnel
- Radiation-spray coupling for realistic flow configurations
- Rapidly solidified titanium alloys by melt overflow
- Rapidly solidified titanium alloys by melt overflow
- Rare earth optical temperature sensor
- Refinements in a viscoplastic model
- Research in structures, structural dynamics, and materials, 1989 : work-in-progress and other special presentation papers presented at the AIAA/ASME/ASCE/AHS/ASC 30th Structures, Structural Dynamics, and Materials Conference held in Mobile, Alabama, April 3-5, 1989
- Research relative to a model of the Orion nebula : final technical report
- Reynolds-averaged Navier-Stokes solutions to flat plate film cooling scenarios
- SRM propellant and polymer materials structural modeling
- SSME structural dynamic model development : phase II, final report
- Sample data effects of high-pass filters
- Satellite attitude motion models for capture and retrieval investigations
- Semiannual progress report on real time control for NASA robotic gripper
- Shielded-twisted-pair cable model for chafe fault detection via time-domain reflectometry
- Silent aircraft initiative concept risk assessment
- Simulating bone loss in microgravity using mathematical formulations of bone remodeling
- Simulation of a cold gas thruster system and test data correlation
- Simulation of supersonic jet noise with the adaptation of overflow CFD code and Kirchhoff surface integral
- Simulation tool for dielectric barrier discharge plasma actuators at atmospheric and sub-atmospheric pressures : SBIR phase I final report
- Solar thermal upper stage liquid hydrogen pressure control testing and analytical modeling
- Spectrum orbit utilization program documentation : SOUP5 version 3.8 user's manual
- Spectrum orbit utilization program technical manual : SOUP5 version 3.8
- Spreadsheet calculation of jets in crossflow : opposed rows of slots slanted at 45°
- Spreadsheet calculations for jets in crossflow : opposed rows of inline and staggered holes and single and opposed rows with alternating hole sizes
- Stability limits of a PD controller for a flywheel supported on rigid rotor and magnetic bearings
- Stochastic model of the NASA/MSFC ground facility for large space structures with uncertain parameters : part II, the maximum entropy approach
- Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach
- String fragmentation model in space radiation problems
- Structural acoustic prediction and interior noise control technology
- Structural and thermal response of 30 cm diameter ion thruster optics
- Subgrid combustion modeling for the next generation national combustion code
- Symmetry considerations in the scattering of identical composite bodies
- Synthesis from design requirements of a hybrid system for transport aircraft longitudinal control
- Synthetic bounds for semi-Markov reliability models
- System identification and POD method applied to unsteady aerodynamics
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- The dependence of atomic oxygen undercutting of protected polyimide Kapton(R) H upon defect size
- The effect of nondeterministic parameters on shock-associated noise prediction modeling
- The effects of molecular weight on the single lap shear creep and constant strain rate behavior of thermoplastic polyimidesulfone adhesive
- The inviscid stability of supersonic flow past a sharp cone
- The linear bicharacteristic scheme for electromagnets
- The microwave propagation and backscattering characteristics of vegetation
- The modelling of the solar upper photosphere and lower chromosphere based upon ATM data
- The numerical analysis of a turbulent compressible jet
- The numerical analysis of a turbulent compressible jet
- The reduction of lunar regolith by carbothermal processing using methane
- Thermal barrier coating life prediction model development : phase 1, final report
- Thermostructural analysis of the SOFIA fine field and wide field imagers subjected to convective thermal shock
- Thermostructural evaluation of joggle region on the shuttle orbiter's wing leading edge
- Turbulent chemical interaction models in NCC : comparison
- User-defined material model for progressive failure analysis
- Using the NASA GRC sectored-one-dimensional combustor simulation
- VAB Sway Investigation
- VORCOR : a computer program for calculating characteristics of wings with edge vortex separation by using a vortex filament and core model
- Vision 2040 : a roadmap for integrated, multiscale modeling and simulation of materials and systems
- Water immersion and its computer simulation as analogs of weightlessness
- Weather research and forecasting model wind sensitivity study at Edwards Air Force Base, CA
- Welding as science : applying basic engineering principles to the discipline
- Wind-US user's guide
- Wind-US user's guide

## Embed (Experimental)

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.rcls.org/resource/taJxpCZ1afY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.rcls.org/resource/taJxpCZ1afY/">Mathematical models</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.rcls.org/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.rcls.org/">Ramapo Catskill Library System</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Mathematical models

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.rcls.org/resource/taJxpCZ1afY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.rcls.org/resource/taJxpCZ1afY/">Mathematical models</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.rcls.org/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.rcls.org/">Ramapo Catskill Library System</a></span></span></span></span></div>`